Inverter heat pump for hot tubs and swim spa pools.
Colour: Black – Aluminium; Digital display: Yes; Heat output: 8.8 kW; Cooling: Yes; Cooling capacity: 4.5 kW; Recommended pool volume: 20-40 m3; Connection: 50 mm; Defrosting: Yes; Rated power input: 0.18-1.53 kW; Refrigerant: R32; Voltage: 230 V; Efficiency: up to 15.6 C.O.P.
Rapid Inver-X is equipped with an inverter compressor and fan motor, thanks to which both the power input and the fan speed are continuously regulated by electronics according to the current need. A major advantage of this system is faster heating and maintaining a constant water temperature, while eliminating the “cold starts” that affect both the service life of the heat-pump components and the electrical load. A C.O.P. of up to 16.5 under ideal conditions is not a marketing trick but is documented by a TÜV Rheinland certificate
By combining „Full-Inverter" technology with new improved components, better heat exchange and better air circulation have been achieved. The new chassis, an upgraded evaporator and an insulated compressor enable an instant 20% increase in heating output without increasing noise or energy consumption.
Three intelligent modes:
- Boost: 120% power – thanks to TurboSilence technology
- Smart
- Silence
When the Rapid Inver-X runs at medium or low speed to maintain hot tub or swim spa pool temperature, compressor noise is extremely low and, depending on swim spa pool size, it has a COP efficiency of up to 15.5 (at air temperature 26°C, water 26°C and air humidity 80%)
Built-in Wi-Fi module
Cooling capacity: 4,5 kW
| Output: Air 26°C, Water 26°C, Humidity 80% | |
| Heat output (Smart mode) | 8,8 kW |
| Heat output (Booster mode) | 10,5 kW |
| COP | 15,6-7,3 |
| COP (50% of power capacity) | 11,8 |
| Output: Air 15°C, Water 26°C, Humidity 70% | |
| Heat output (Smart mode) | 6,3 kW |
| Heat output (Booster mode) | 7,5 kW |
| COP | 7,1~4,9 |
| COP (50% of power capacity) | 6,7 |
Technical parameters
| Product type: | Inverter heat pump for hot tubs and swim spa pools |
|---|---|
| Colour: | Black – Aluminium |
| Digital display: | Ano |
| Heat output: | 8,8 kW |
| Cooling: | Ano |
| Cooling capacity: | 4,5 kW |
| Recommended pool volume: | 20-40 m3 |
| Connection: | 50 mm |
| Defrosting: | Ano |
| Rated power input: | 0,18-1,53 kW |
| Refrigerant used: | R32 |
| Voltage: | 230 V |
| Efficiency: | up to 15.6 C.O.P. |
| Body material: | Aluminium |
| For salt water up to 5 g/l (<0.5%): | Ano |
| Net/transport weight kg: | 59 kg |
| Net unit dimensions (w/l/h): | 799x432x650 mm |
| Operating temperature: | – 15 to 43 °C |
| Flow monitoring: | Ano |
| Coil material: | Titan |
| Energy saving: | Ano |
| Rated current: | 0,78-6,65 A |
| Heat exchanger: | Plast |
| Recommended water flow: | 2-4 m3/h |
