Inverter heat pump; Colour: Black – Aluminium; Digital display: Yes; Heat output: 6.5 kW; Cooling: Yes; Cooling capacity: 3 kW; Recommended pool volume: 15-30 m3; Connection: 50 mm; Defrosting: Yes; Rated power input: 0.13-1.06 kW; Refrigerant: R32; Voltage: 230 V; Efficiency: 14.7 C.O.P.
The WiFi module is integrated into the heat pump and does not need to be bought separately.
Rapid Inverter is a fully inverter heat pump. It is fitted with an inverter compressor and fan motor, thanks to which both the power input and the fan speed can be adjusted continuously. The pool is thus intelligently heated with maximum efficiency. The Rapid Inverter heat pump automatically sets itself to an output of 25% to 100% according to the current heating need. Most of the time it runs only at medium or low speed, which maximises efficiency.
When the Rapid Inverter runs at medium or low speed to maintain pool temperature, compressor noise is extremely low. Depending on pool size, the Rapid Inverter has a COP efficiency of up to 15.8 (at air temperature 26°C, water 26°C and air humidity 80%)
Energy saving – up to 2× cheaper operation compared to a standard heat pump
Cooling capacity: 3,0 kW
These heat pumps now use R32 refrigerant.
Technical parameters
| Product type: | Inverter heat pump |
|---|---|
| Colour: | Black – Aluminium |
| Digital display: | Ano |
| Heat output: | 6,5 kW |
| Cooling: | Ano |
| Cooling capacity: | 3 kW |
| Recommended pool volume: | 15-30 m3 |
| Connection: | 50 mm |
| Defrosting: | Ano |
| Rated power input: | 0,13-1,06 kW |
| Refrigerant used: | R32 |
| Voltage: | 230 V |
| Efficiency: | 14,7 C.O.P. |
| For salt water up to 5 g/l (<0.5%): | Ano |
| For salt water over 5 g/l (>0.5%): | Ano |
| Net/transport weight kg: | 42 kg |
| Net unit dimensions (w/l/h): | 894×359×648 mm |
| Fan orientation: | horizontal |
| Operating temperature: | -7 to 43 °C |
| Flow monitoring: | Ano |
| For sea water: | Ano |
| Easy installation: | Ano |
| Rated current: | 0,56-4,6 A |
| Recommended water flow: | 2-4 m3/h |
